Double Girder Grapple and Electromagnetic Overhead Bridge Traveling Crane
Grab and Magnet Electric Overhead Traveling Crane Description:
QP double girder overhead crane is composed with girder frame, overhead crane travel device, and the trolley with lifting and moving device. There are pave the rail for the trolley move on the main girder.
Assemble the moving table on the outside of the two main girder, one side is prepare for the assemble and maintenance the crane move device, another side is prepare for the assemble of the trolley conductor device.
There are full field of view Cabin suspend under the main girder, there are joint control desk or single control box packed within the Cabin, assemble the sidelong ladder between the Cabin and moving table, The main girder joint with the two side end carriage which with the joint point in the middle.
Safety protection system
1. Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible
2. Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device
3. Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling
4. All movements can be switched off by actuating the emergency-off switch at the control station via a main contact
5. High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to prevent over traveling
6. Safety hook latch used for avoiding the lifted material out off from the hook
7. Audible and visual alarm device to inform the person stay near by the travelling crane.
8. Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism
9. Protective earth conductor is fitted as standard
10. Voltage lower protection system
11. Current overload protection system
Technical parameter
| QP Grab and Magnet Overhead Crane |
| Lifting Capacity |
5/5 Ton |
10/10 Ton |
16/16 Ton |
| Span M |
10.5-31.5 |
| Working Duty |
ISO A6 & FEM 3m |
| Lifting height |
Grab |
20 |
18 |
22 |
| Magnet Chuck |
16 |
22 |
22 |
| Speed m/min |
Lifting |
Grab |
40.1 |
40 |
41.8 |
| Magnet Chuck |
15.6 |
10.4 |
13 |
| Trolley travelling |
37.2 |
43.8 |
44.6 |
| Bridge travelling |
93.7 |
76 |
75.3 |
| Motor |
Lifting |
Grab |
YZR225M-8/22 |
YZR225S-10/37 |
YZR315M-10/75 |
| Magnet Chuck |
YZR180L-6/15 |
YZR200L-6/22 |
YZR225M1-6/37 |
| Trolley travelling |
YZR225M-8/22 |
YZR225M-8/22 |
YZR225M-8/22 |
| Crane travelling |
YZR160M-6/7.5*2 |
YZR160L-6/11*2 |
YZR160L-6/11*2 |
| Weight |
Trolley |
8.4Ton |
13.3 Ton |
21.2 Ton |
| Total Weight |
24.7~45.7 Ton |
29.3~51.2 Ton |
24.5~74.2 Ton |
| Power Source |
220V,380V,400V,415,440V,50 or 60HZ,3 Phase |
About us:
1. We are in Crane Hometown of China, could supply you the best quality crane , grab bucket and electromagnet with high technique, and the price is the best.
2. We could supply you all kinds of industry cranes from 0.25tons to 900tons, pass GB/T 19001-2000 idt ISO 9001:2000, GB/T 24001-2004 idt ISO 14001:2004, GB/T 28001-2001,OHSAS 18001:1999, CE,GOST and so on.
Audited Supplier 
){kind=link}