Workshop Design Swf hoist Eot Crane-Single Girder Electric Hoist Overhead Crane
Specifications
|
Lifting capacity (T) |
1, 2, 3, 5, 10T |
16, 20T |
| Span(M) |
7.5-22.5M |
| Crane travelling mechanism |
Travelling speed(m/min) |
20 |
30 |
45 |
60 |
75 |
20 |
30 |
45 |
60 |
75 |
| Reducer ratio |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
| Motor |
Model |
ZDY21-4 |
ZDY21-4 |
ZDY122-4 |
ZDY131S-4 |
ZDY112L1-4 |
| Power(kw) |
2× 0.8 |
2× 1.5 |
1.5× 2 |
2.2× 2 |
2.2× 2 |
| Rotation (m/min) |
1380 |
1380 |
Lifting mechanism
(electric hoist)& electric hoist travelling mechanism |
Electric hoist model |
CD1/MD1 |
MD1/HC |
| Lifting speed (m/min) |
8, 8/0.8 7, 7/0.7 |
3.5 3.5/0.35 |
| Lifting height (m) |
6, 9, 12, 18, 24, 30 |
12, 18, 24, 30 |
| Travelling speed (m/min) |
20(30) |
20(30) |
| Motor |
Taper Squirrel-cage type |
Taper Squirrel-cage type |
| Work duty |
A3 |
| Power supply |
380V 50HZ three phase, as your demand |
| Wheel diameter |
270mm |
370mm |
| Width of trail |
37-70mm |
37-70mm |
Description
Top running Low Head Room Single Girder Bridge Crane commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge.
Application
LDA is most widely used in workshops, warehouses and material yards. The electric hoist runs along the lower flange of the I-steelof the girder to accomplish the material handling.
Features
1.Characterized by more compact structure and higher strength steel as a whole, LD consists of the girder, end carriages, electric hoist, long traveling mechanism, cabin or hand controller, and electrical control system.
2. Motors: is with top quality in China or other brand according to your requirement.
3. Span:7.5-22.5m, and can also be customized according to your requirement.
4. The whole body is processed by medium-frequency quenching technology, and intensity, rigidity and tenacity.
All the metal is processed by shot-blasting technology and can largely increase the intensity.
Safety system:
1. Overload protection device
2. Emergency brake
3. Rubber buffers
Audited Supplier 
){kind=link}