| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Manual Control Mine 10M/Min Wire Rope Pulling Winch
Product description:
JM type winch are mainly used for installation and disassembly of various large and extra large concrete, steel structures and mechanical equipment. Its structural features are the orderly arrangement of the wire ropes, safe and reliable lifting. It is suitable for the installation of various bridges, ports, docks and other road and bridge projects and large-scale factory and mine engineering equipment.
JK type winch are mainly used for installation and disassembly of various large and extra large concrete, steel structures and mechanical equipment. Its structural features are the orderly arrangement of the wire ropes, safe and reliable lifting. It is suitable for the installation of various bridges, ports, docks and other road and bridge projects and large-scale factory and mine engineering equipment.
Features
Final Drives gears are made with heat-treated carbon steel offering greater strength.
Precision needle bearing used in high-load areas offering lower friction level and longer life.
High impact case providing weather resistance and protection for internal components.
Durable hook safety snap keeping the loads attached.
Min Features:
Technical Feature:
1. Independent Hydraulic brake,dual brake if necessary
2. Special design for drum size and winch overall size.
3. Durable Forged and hardness treatment gears and bearings
4. High protective motors to avoid dust and rains etc.
5. Anticorrosive paint
6. Professional package
7. One year quality guraneed
Attention:
1. Before you use the hoist,please do remember to check the hooks and bodies,the brake device and the lubrication of transmitting parts,and load chains in good condition as well as the die motions.
2. Overload is strictly forbidden.
3. No hook tips loading.No direct binding of a load with one chain.
4. No over lifting,no over lowering.
5. Keep anybody out of the place under the loading.
Technical Parameter(customizable)
| KY brand winch | WINCH TECHNIQUE PARAMETER | |||||||||||
| Rated load (KN) | Rated speed (m/min) | Rope capacity (m) | Rope Diameter (mm) | Motor type | Motor power (KN) | Overall dimension (mm) | Weight(Kg) | Type | ||||
| JM MODEL LOW SPEED ELECTRONIC CONTROL WINCH | JM1 | 10 | 15 | 100 | 9.3 | Y112M-6 | 3 | 620*710*417 | 270 | / | ||
| JM1.6 | 16 | 16 | 150 | 12.5 | Y132M2-6 | 5.5 | 945*996*570 | 500 | / | |||
| JM2 | 20 | 16 | 150 | 13 | Y160M-6 | 7.5 | 945*996*570 | 550 | / | |||
| JM3.2 | 32 | 9.5 | 150 | 15.5 | YZR160M2-6 | 7.5 | 1430*1160*910 | 1100 | open type | |||
| JM3.2B | 32 | 12 | 195 | 15.5 | YZR160M2-6 | 7.5 | 1082*1014*610 | 536 | four-axis | |||
| JM5 | 50 | 10 | 270 | 21.5 | YZR160L-6 | 11 | 1235*1230*805 | 1560 | four-axis | |||
| JM5B | 50 | 9.5 | 200 | 21.5 | YZR160L-6 | 11 | 1620*1260*945 | 1800 | open type | |||
| JM5C | 50 | 9.5 | 250 | 21.5 | YZR160L-6 | 11 | 1235*1230*805 | 1800 | four-axis | |||
| JM5D | 50 | 15 | 250 | 21.5 | YZR180L-6 | 15 | 1235*1230*805 | 1850 | four-axis | |||
| JM5E | 50 | 20 | 250 | 21.5 | YZR200L-6 | 22 | 1235*1230*805 | 2000 | four-axis | |||
| JM6 | 60 | 9.5 | 270 | 24 | YZR180L-6 | 15 | 1235*1509*805 | 1800 | four-axis | |||
| JM8 | 80 | 8 | 250 | 26 | YZR180L-6 | 15 | 2090*1475*956 | 2900 | open type | |||
| JM8B | 80 | 9.5 | 350 | 26 | YZR180L-6 | 15 | 1075*1598*985 | 2650 | four-axis | |||
| JM10 | 100 | 8 | 170 | 30 | YZR200L-6 | 22 | 2090*1475*956 | 3000 | / | |||
| JM10B | 100 | 9.5 | 250 | 30 | YZR200L-6 | 22 | 1705*1598*985 | 3500 | / | |||
| JM12.5 | 125 | 8 | 300 | 34 | YZR225M-6 | 30 | 2880*2200*1550 | 5000 | / | |||
| JM13.5 | 135 | 0-5 | 290 | 28 | YZP225S-8 | 22 | 2990*2363*1650 | 6500 | / | |||
| JM16 | 160 | 10 | 500 | 37 | YZR250M2-8 | 37 | 3750*2400*1850 | 8800 | / | |||
| JM20 | 200 | 10 | 600 | 43 | YZR280S-8 | 45 | 3950*2560*1950 | 9900 | / | |||
| JM25 | 250 | 9 | 700 | 48 | YZR280M-8 | 55 | 4350*2800*2030 | 13500 | / | |||
| JM32 | 320 | 9 | 700 | 56 | YZR315S-8 | 75 | 4500*2850*2100 | 14800 | / | |||
| JM50 | 500 | 9 | 800 | 65 | YZR315M-8 | 90 | 4930*3050*2250 | 19500 | / | |||
| JM65 | 650 | 10.5 | 3600 | 64 | LA8315-8AB | 160 | 5900*4680*3200 | 46000 | / | |||
| JK MODEL FAST SPEED ELECTRONIC CONTROL WINCH | JK0.5 | 5 | 22 | 190 | 7.7 | Y100L-4 | 3 | 620*701*417 | 200 | / | ||
| JK1 | 10 | 22 | 100 | 9.3 | Y112M-4 | 4 | 620*701*417 | 300 | / | |||
| JK1.6 | 16 | 24 | 150 | 12.5 | Y132S-4 | 5.5 | 945*996*570 | 500 | / | |||
| JK2 | 20 | 24 | 150 | 13 | Y132M-4 | 7.5 | 945*996*570 | 550 | / | |||
| KK3.2 | 32 | 25 | 290 | 15.5 | YZR180L-6 | 15 | 1325*1335*840 | 1011 | / | |||
| JK3.2B | 32 | 30 | 250 | 15.5 | YZR200L-6 | 22 | 1900*1738*985 | 1500 | / | |||
| JK5 | 50 | 30 | 300 | 21.5 | YZR225M-6 | 30 | 1900*1620*985 | 2050 | / | |||
| JK5B | 50 | 25 | 210 | 21.5 | YZR225M-8 | 22 | 2250*2500*1300 | 2264 | / | |||
| JK8 | 80 | 25 | 160 | 26 | YZR280S-8 | 45 | 1533*1985*1045 | 3000 | / | |||
| JK10 | 100 | 30 | 300 | 30 | YZR315S-8 | 55 | 2250*2500*1300 | 5100 | / | |||
| JMM MODEL FRICTION WINCH | JMM10 | 100 | 10 | 4800 | 30 | YZR225M-6 | 30 | 1980*2650*850 | 6000 | / | ||
| JMM16 | 160 | 11 | 1000 | 34.5 | YZR225M2-6 | 45 | 3350*1920*1320 | 9500 | / | |||
| JMM20 | 200 | 11 | 3600 | 39 | YZR280S-8 | 55 | 3500*1960*1320 | 10000 | / | |||
| JMM32 | 320 | 10 | 3200 | 52 | YZR280M-6 | 75 | 4330*2350*1760 | 16000 | / | |||
| JMM55 | 550 | 5 | 2000 | 60 | YZR280M-6 | 75 | 5000*2800*1900 | 22000 | / | |||
){kind=link}