Single Girder EOT Crane-10 ton Single Girder Overhead Crane
Specifications:
1) Load: 10t
2) Span: 10.5-35.5m
3) Lifting height: According to your requirements.
4) Working duty: A3.
LDA model single girder E.O.T cranes are widely used in various places such as factory, warehouse, and stuff yards to lift goods, forbidden to be used in flammable, explosive and corrosive environment. The work class is A3. Hoisting Capacity: 10T, span: 10.5-31.5m. These kinds of products are operated by ways of ground and cabin control. There are open and closed styles for driver's cabin; It could be divided into left and right installation according to practical situations. Entrance direction adopts profile and top entering to satisfy different needs of customer's choice. The crane can be used for both indoor and outdoor operations and water-proof cloth is needed in out door operation.
This kind of crane usually work together with electric hoist as a light lifting equipment, alo can work with many other lifting tools like grab bucket, magnet and so on.
Customer Care:
Our philosophy is that the customer should be happy with the system performance and enormous improvement in work environment. And our aim is reducing the labor inputs for eternity working together with customer and ensuring that the work is executed to the utmost satisfaction of the customer.
Henan Mine Crane Company concentrate to have positive and flexible approach towards customer need through its comprehensive solution and service capabilities, professionally and cost effectively. As a company whose success derives from mains fully committed to develop close working partnership with its customer.
Welcome to contact us by E-mail or online, you will receive our prompt and careful reply!
| Lifting capacity (T) |
1, 2, 3, 5, 10T |
|
| Span(M) |
7.5-22.5M |
| Crane traveling mechanism |
Traveling speed(m/min) |
20 |
30 |
45 |
60 |
75 |
20 |
30 |
45 |
60 |
75 |
| Reducer ratio |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
| Motor |
Model |
ZDY21-4 |
ZDY21-4 |
ZDY122-4 |
ZDY131S-4 |
ZDY112L1-4 |
| Power(kw) |
2× 0.8 |
2× 1.5 |
1.5× 2 |
2.2× 2 |
2.2× 2 |
| Rotation (m/min) |
1380 |
1380 |
Lifting mechanism
(electric hoist)& electric hoist traveling mechanism |
Electric hoist model |
CD1/MD1 |
MD1/HC |
| Lifting speed (m/min) |
8, 8/0.8 7, 7/0.7 |
3.5 3.5/0.35 |
| Lifting height (m) |
6, 9, 12, 18, 24, 30 |
12, 18, 24, 30 |
| Traveling speed (m/min) |
20(30) |
20(30) |
| Motor |
Taper Squirrel-cage type |
Taper Squirrel-cage type |
| Work duty |
A3-A5 |
| Power supply |
380V 50HZ three phase |
| Wheel diameter |
270mm |
370mm |
| Width of trail |
37-70mm |
37-70mm |
Audited Supplier 
){kind=link}