Metallurgy Casting Overhead Crane-Metal Foundry Overhead Crane
Special usage:
This crane is mainly used in BOF bay, EAF bay and CCP bay in steel smelting shop. They have good performance to lift the molten metal. Working class could achieve A7 for long time continuous lifting and transferring work.
Key words which characterize our "steel production" application focus are:
High ambient temperatures
High level of availability
Severe operating conditions
Low-maintenance designs with a long service life
Safety hoist units
Redundant drive systems
Equipment and structure
Normally there are four beams and two trolleys assembled on the crane, laminated ladle hook is equipped on the main trolley for lifting the ladle, and Aux trolley is for overturning the ladle and other assistant handing. The electrical appliance is installed inside of the main girder with heat insulation device and cooling device, the crane can work efficiently under harsh conditions such as high temperature and dust-laden
Use various frequency speed system with speed ratio as1: 10 for main mechanisms such as hoisting, trolley traversing and crane travelling. Also we can choose the suitable speed under the customer requirement.
| Lifting weight |
Primary handcart |
T |
100 |
| Secondary handccart |
30 |
| Span |
|
16 |
| Lifting height |
Primary handcart |
M |
18 |
| Secondary handccart |
19 |
| Working class |
A6 |
Speed |
Lift |
Primary handcart |
m/min |
7.54 |
| Secondary handccart |
8.93 |
| Travel |
Primary handcart |
35.08 |
| Secondary handccart |
42.44 |
| Cart |
76.99 |
Motor |
Lift |
Primary handcart |
Type/kw |
YZR355M-10/90× 2 |
| Secondary handccart |
YZR280M-10/55 |
| Travel |
Primary handcart |
YZR160L-8/9× 2 |
| Secondary handccart |
YZR160M1-6/6.3 |
| Cart |
YZR225M-8/22× 4 |
Weight |
Primary handcart |
T |
66 |
| Secondary handcart |
10.25 |
| Cart |
173 |
| Max wheel pressure |
KN |
520 |
| Steel track |
|
QU120 |
| Power supply |
|
3-phase A. C. 50Hz 380V |
Audited Supplier 
){kind=link}