Single Beam Electric Hoist Overhead Travling E.O.T Crane
Specifications:
1. Capacity: 1~16t
2. Span: 5~31.5m
3. Ensure peak efficiency for lifelong lifting
4. Pass ISO, Quick Delivery
5. Easy payment
6. Lifting Height: No limited (Can be designed according to your real requirement)
7. Working Duty: A3~A5 according to the use frequency
8. Power Source: 3pH, 380V, 50Hz or under customer requirement.
9. Working Temperature: -25~+40° C
Electric Single Beam Overhead Crane is equipped with the features of reasonable structure, strong rigidity, and light dead weight of whole set, which could effectively save your factory space and investment cost, its particular and special travelling structure is your best choice.
This crane is applicable to transfer, assembly, check and repair as well as load and unload various goods at mechanic processing workshop, warehouses, factory, stuff yard and other material handling situations, esp. Applied to material handling that need precise positioning, large components precise assembly situations.
It is operated by ways of ground control, wireless remote control and cabin control. There are open and closed styles for driver's cabin; It could be divided into left and right installation according to practical situations. Entrance direction adopts profile and top entering to satisfy different needs of customer's choice.
Three different type of the LD single beam overhead crane:
LDA electric single-girder crane is composed of girder weld by steel plate and I-steel, end girder, electric hoist and traveling mechanism. The electric hoist runs along the lower flange of the I-steel of the girder to accomplish article hoisting. It features light structure and easy installation and maintainance, and is widely used for different places for hoisting such as factories, warehouses and material yards. The classification group is A3, and the operating ambient temperature is -25° C~40° C.
LDC electric single-girder crane is composed of box-shaped girder weld by steel plates, end girder, electric hoist and traveling mechanism. The lower flange of the traveling orbit of electric hoist to accomplish article hoisting. The electric block, of low headroom structure, can effectively increase the lifting height, so that it is applicable to the places where the workshop is low and the requirement of the lifting height is high.
LDP electric single-girder crane is a small-siza low headroom crane. The electric hoist is at one side of the gorder, which increase the work space of the hook and reduces the workshop height and cost. It is applicable to the places where the workshop's headroom is low.
Advantages:
1). First class quality with competitive price
2). Compact design, optimal use of the size of work areas
3). Reasonable structure, favorable performance
4). Control the load easily and position the load exactly
5). Smooth starting and stopping
6). Superior safety and reliability
7). Low noise, commodious cabin and good view
8). Minimum& Easy maintenance, excellent exchangeability for parts and components
9). Saves electricity specifications
10). "One-Stop Shop" for your crane and hoist needs
Safety features:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
| Lifting capacity (T) |
1, 2, 3, 5, 10T |
16T |
| Span(M) |
7.5-22.5M |
| Crane travelling mechanism |
Travelling speed(m/min) |
20 |
30 |
45 |
60 |
75 |
20 |
30 |
45 |
60 |
75 |
| Reducer ratio |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
58.78 |
39.38 |
26.36 |
19.37 |
15.88 |
| Motor |
Model |
ZDY21-4 |
ZDY21-4 |
ZDY122-4 |
ZDY131S-4 |
ZDY112L1-4 |
| Power(kw) |
2× 0.8 |
2× 1.5 |
1.5× 2 |
2.2× 2 |
2.2× 2 |
| Rotation (m/min) |
1380 |
1380 |
Lifting mechanism
(electric hoist)& electric hoist travelling mechanism |
Electric hoist model |
CD1/MD1 |
MD1/HC |
| Lifting speed (m/min) |
8, 8/0.8 7, 7/0.7 |
3.5 3.5/0.35 |
| Lifting height (m) |
6, 9, 12, 18, 24, 30 |
12, 18, 24, 30 |
| Travelling speed (m/min) |
20(30) |
20(30) |
| Motor |
Taper Squirrel-cage type |
Taper Squirrel-cage type |
| Work duty |
A3-A5 |
| Power supply |
380V 50HZ three phase or according to your requirements |
Audited Supplier 
){kind=link}
){kind=link}